kmod-et131x-1.2.3-1.el6.elrepo.i686.rpm


Advertisement

Description

kmod-et131x - et131x kernel module(s)

Property Value
Distribution CentOS 6
Repository ELRepo i386
Package filename kmod-et131x-1.2.3-1.el6.elrepo.i686.rpm
Package name kmod-et131x
Package version 1.2.3
Package release 1.el6.elrepo
Package architecture i686
Package type rpm
Category System Environment/Kernel
Homepage http://www.agere.com/
License Dual BSD/GPL
Maintainer -
Download size 34.26 KB
Installed size 72.47 KB
This package provides the et131x kernel module(s) built
for the Linux kernel using the i686 family of processors.

Alternatives

Package Version Architecture Repository
kmod-et131x-1.2.3-1.el6.elrepo.x86_64.rpm 1.2.3 x86_64 ELRepo
kmod-et131x - - -

Requires

Name Value
/sbin/depmod -
kernel(__const_udelay) = 0xeae3dfd6
kernel(__kmalloc) = 0x12da5bb2
kernel(__list_add) = 0x0343a1a8
kernel(__netif_schedule) = 0xbc90c828
kernel(__pci_register_driver) = 0x7997cb91
kernel(__tracepoint_kmalloc) = 0x105e2727
kernel(_spin_lock) = 0x973873ab
kernel(_spin_lock_irqsave) = 0x712aa29b
kernel(_spin_unlock_irqrestore) = 0x4b07e779
kernel(add_timer) = 0x46085e4f
kernel(alloc_etherdev_mq) = 0xd8301c2f
kernel(bitrev32) = 0xfaf98462
kernel(capable) = 0x7dceceac
kernel(crc32_le) = 0xa34f1ef5
kernel(del_timer_sync) = 0x0e83fea1
kernel(dev_alloc_skb) = 0xfd86943d
kernel(dev_driver_string) = 0xe871a690
kernel(dev_get_drvdata) = 0x93b38b05
kernel(dev_kfree_skb_any) = 0x5c12c04c
kernel(dev_set_drvdata) = 0xf6d62bd3
kernel(dma_alloc_from_coherent) = 0x097599d5
kernel(dma_ops) = 0x43041aa8
kernel(dma_release_from_coherent) = 0x3c061aef
kernel(eth_type_trans) = 0x1833d628
kernel(eth_validate_addr) = 0x19ec5101
kernel(free_irq) = 0xf20dabd8
kernel(free_netdev) = 0x477b004a
kernel(get_random_bytes) = 0x79aa04a2
kernel(init_timer_key) = 0x6a9f26c9
kernel(ioremap_nocache) = 0x42c8de35
kernel(iounmap) = 0xedc03953
kernel(jiffies) = 0x7d11c268
kernel(kfree) = 0x037a0cba
kernel(kmem_cache_alloc) = 0xd8b08694
kernel(kmem_cache_alloc_notrace) = 0xfc822e6e
kernel(kmem_cache_create) = 0xd4c1dda0
kernel(kmem_cache_destroy) = 0x2dc45af9
kernel(kmem_cache_free) = 0xe5942277
kernel(list_del) = 0x0521445b
kernel(malloc_sizes) = 0xc288f8ce
kernel(mem_section) = 0x5c760099
kernel(memcpy) = 0x2e60bace
kernel(memset) = 0x2bc95bd4
kernel(mod_timer) = 0x45450063
kernel(module_layout) = 0x0041086e
kernel(netif_carrier_off) = 0xc431d8b0
kernel(netif_carrier_on) = 0xa96f9d93
kernel(netif_rx) = 0x74d5fcbb
kernel(netpoll_trap) = 0x01902adf
kernel(page_address) = 0x229c8992
kernel(param_get_uint) = 0x108e8985
kernel(param_set_uint) = 0x3285cc48
kernel(pci_bus_read_config_byte) = 0xe168a33c
kernel(pci_bus_read_config_dword) = 0x1f0e15d5
kernel(pci_bus_write_config_byte) = 0xf869e4d6
kernel(pci_bus_write_config_dword) = 0xde6c3d79
kernel(pci_bus_write_config_word) = 0x2107fe08
kernel(pci_dev_get) = 0x0619e8f2
kernel(pci_dev_put) = 0xb06734da
kernel(pci_disable_device) = 0x9c22db12
kernel(pci_enable_device) = 0xf3cc0b6c
kernel(pci_find_capability) = 0xbd3a0a87
kernel(pci_release_regions) = 0xc041dc0c
kernel(pci_request_regions) = 0xc2db98b4
kernel(pci_save_state) = 0x2c7745cd
kernel(pci_set_consistent_dma_mask) = 0x78c5b4fa
kernel(pci_set_dma_mask) = 0xc8f49417
kernel(pci_set_master) = 0x1868710d
kernel(pci_unregister_driver) = 0xec88c4a4
kernel(printk) = 0xb72397d5
kernel(pv_irq_ops) = 0x8ff4079b
kernel(register_netdev) = 0xf89a2b57
kernel(request_threaded_irq) = 0x859c6dc7
kernel(schedule_work) = 0xc633495b
kernel(skb_put) = 0x07e0913d
kernel(slab_buffer_size) = 0x8fde5204
kernel(unregister_netdev) = 0x04dc1e41
kernel(warn_slowpath_null) = 0x16305289
kernel(x86_dma_fallback_dev) = 0x99b12865

Provides

Name Value
et131x-kmod = 1.2.3-1.el6.elrepo
kabi-modules = 2.6.32-71.el6.i686
kmod-et131x = 1.2.3-1.el6.elrepo
kmod-et131x(x86-32) = 1.2.3-1.el6.elrepo

Download

Type URL
Mirror mirror.rackspace.com
Binary Package kmod-et131x-1.2.3-1.el6.elrepo.i686.rpm
Source Package et131x-kmod-1.2.3-1.el6.elrepo.src.rpm

Install Howto

  1. Download latest elrepo-release rpm from
    http://mirror.rackspace.com/elrepo/elrepo/el6/i386/RPMS/
  2. Install elrepo-release rpm:
    # rpm -Uvh elrepo-release*rpm
  3. Install kmod-et131x rpm package:
    # yum install kmod-et131x

Files

Path
/etc/depmod.d/kmod-et131x.conf
/lib/modules/2.6.32-71.el6.i686/
/lib/modules/2.6.32-71.el6.i686/extra/
/lib/modules/2.6.32-71.el6.i686/extra/et131x/et131x.ko
/usr/share/doc/kmod-et131x-1.2.3/GPL-v2.0.txt
/usr/share/doc/kmod-et131x-1.2.3/README

Changelog

2011-05-10 - Alan Bartlett <ajb@elrepo.org> - 1.2.3-1
- Initial el6 build of the kmod package.

See Also

Package Description
kmod-f71882fg-0.0-1.el6.elrepo.i686.rpm f71882fg kernel module(s)
kmod-f71882fg-0.0-2.el6.elrepo.i686.rpm f71882fg kernel module(s)
kmod-fglrx-13.4-1.el6.elrepo.i686.rpm fglrx kernel module(s)
kmod-fglrx-14.12-1.el6.elrepo.i686.rpm fglrx kernel module(s)
kmod-fglrx-14.9-1.el6.elrepo.i686.rpm fglrx kernel module(s)
kmod-fglrx-15.11-1.el6.elrepo.i686.rpm fglrx kernel module(s)
kmod-fglrx-15.12-1.el6.elrepo.i686.rpm fglrx kernel module(s)
kmod-fglrx-15.12-2.el6.elrepo.i686.rpm fglrx kernel module(s)
kmod-fglrx-15.7-1.el6.elrepo.i686.rpm fglrx kernel module(s)
kmod-fglrx-15.9-1.el6.elrepo.i686.rpm fglrx kernel module(s)
kmod-fglrx-legacy-13.1-2.el6.elrepo.i686.rpm fglrx-legacy kernel module(s)
kmod-flashcache-0.0-3.el6.elrepo.i686.rpm flashcache kernel module(s)
kmod-hfs-0.0-1.el6.elrepo.i686.rpm hfs kernel module(s)
kmod-hfs-0.0-2.el6.elrepo.i686.rpm hfs kernel module(s)
kmod-hfsplus-0.0-1.el6.elrepo.i686.rpm hfsplus kernel module(s)
Advertisement
Advertisement