libreswan-3.15-7.5.el6_9.x86_64.rpm


Advertisement

Description

libreswan - IPsec implementation with IKEv1 and IKEv2 keying protocols

Property Value
Distribution CentOS 6
Repository CentOS x86_64
Package filename libreswan-3.15-7.5.el6_9.x86_64.rpm
Package name libreswan
Package version 3.15
Package release 7.5.el6_9
Package architecture x86_64
Package type rpm
Category System Environment/Daemons
Homepage https://libreswan.org/
License GPLv2
Maintainer -
Download size 1.56 MB
Installed size 4.60 MB
Libreswan is a free implementation of IPsec & IKE for Linux.  IPsec is
the Internet Protocol Security and uses strong cryptography to provide
both authentication and encryption services.  These services allow you
to build secure tunnels through untrusted networks.  Everything passing
through the untrusted net is encrypted by the ipsec gateway machine and
decrypted by the gateway at the other end of the tunnel.  The resulting
tunnel is a virtual private network or VPN.
This package contains the daemons and userland tools for setting up
Libreswan. It supports the NETKEY/XFRM IPsec kernel stack that exists
in the default Linux kernel.
Libreswan also supports IKEv2 (RFC-7296) and Secure Labeling
Libreswan is based on Openswan-2.6.38 which in turn is based on FreeS/WAN-2.04

Alternatives

Package Version Architecture Repository
libreswan-3.15-7.5.el6_9.i686.rpm 3.15 i686 CentOS
libreswan-3.13-1.el6.x86_64.rpm 3.13 x86_64 EPEL
libreswan-3.13-1.el6.i686.rpm 3.13 i686 EPEL
libreswan-3.7-1.el6.lux.1.x86_64.rpm 3.7 x86_64 Lux
libreswan - - -

Requires

Name Value
/sbin/chkconfig -
/sbin/service -
/usr/bin/python -
bash -
chkconfig -
coreutils -
fipscheck(x86-64) -
initscripts -
iproute >= 2.6.8
libaudit.so.1()(64bit) -
libc.so.6(GLIBC_2.7)(64bit) -
libcap-ng.so.0()(64bit) -
libcrypt.so.1()(64bit) -
libcrypt.so.1(GLIBC_2.2.5)(64bit) -
libcurl.so.4()(64bit) -
libdl.so.2()(64bit) -
libevent-2.0.so.5()(64bit) -
libevent_pthreads-2.0.so.5()(64bit) -
libfipscheck.so.1()(64bit) -
libgmp.so.3()(64bit) -
liblber-2.4.so.2()(64bit) -
libldap-2.4.so.2()(64bit) -
libnspr4.so()(64bit) -
libnss3.so()(64bit) -
libnss3.so(NSS_3.10)(64bit) -
libnss3.so(NSS_3.11.7)(64bit) -
libnss3.so(NSS_3.12)(64bit) -
libnss3.so(NSS_3.12.3)(64bit) -
libnss3.so(NSS_3.15)(64bit) -
libnss3.so(NSS_3.2)(64bit) -
libnss3.so(NSS_3.3)(64bit) -
libnss3.so(NSS_3.4)(64bit) -
libnss3.so(NSS_3.5)(64bit) -
libnss3.so(NSS_3.7)(64bit) -
libnss3.so(NSS_3.8)(64bit) -
libnss3.so(NSS_3.9)(64bit) -
libnssutil3.so()(64bit) -
libpam.so.0()(64bit) -
libpam.so.0(LIBPAM_1.0)(64bit) -
libplc4.so()(64bit) -
libplds4.so()(64bit) -
libpthread.so.0()(64bit) -
libpthread.so.0(GLIBC_2.2.5)(64bit) -
libpthread.so.0(GLIBC_2.3.2)(64bit) -
libpthread.so.0(GLIBC_2.3.4)(64bit) -
libresolv.so.2()(64bit) -
libresolv.so.2(GLIBC_2.2.5)(64bit) -
librt.so.1()(64bit) -
librt.so.1(GLIBC_2.2.5)(64bit) -
libselinux.so.1()(64bit) -
libsmime3.so()(64bit) -
libssl3.so()(64bit) -
libunbound.so.2()(64bit) -
nss-softokn -
nss-tools -
rtld(GNU_HASH) -

Provides

Name Value
config(libreswan) = 3.15-7.5.el6_9
libreswan = 3.15-7.5.el6_9
libreswan(x86-64) = 3.15-7.5.el6_9
openswan = 3.15-7.5.el6_9
openswan-doc = 3.15-7.5.el6_9

Conflicts

Name Value
openswan < 3.15-7.5.el6_9

Obsoletes

Name Value
openswan < 3.15-7.5.el6_9

Download

Type URL
Mirror mirror.centos.org
Binary Package libreswan-3.15-7.5.el6_9.x86_64.rpm
Source Package libreswan-3.15-7.5.el6_9.src.rpm

Install Howto

Install libreswan rpm package:

# yum install libreswan

Files

Path
/etc/ipsec.conf
/etc/ipsec.secrets
/etc/ipsec.d/v6neighbor-hole.conf
/etc/ipsec.d/policies/block
/etc/ipsec.d/policies/clear
/etc/ipsec.d/policies/clear-or-private
/etc/ipsec.d/policies/private
/etc/ipsec.d/policies/private-or-clear
/etc/pam.d/pluto
/etc/prelink.conf.d/libreswan-fips.conf
/etc/rc.d/init.d/ipsec
/etc/sysconfig/pluto
/usr/libexec/ipsec/._import_crl.hmac
/usr/libexec/ipsec/._keycensor.hmac
/usr/libexec/ipsec/._pluto_adns.hmac
/usr/libexec/ipsec/._plutorun.hmac
/usr/libexec/ipsec/._secretcensor.hmac
/usr/libexec/ipsec/._stackmanager.hmac
/usr/libexec/ipsec/._updown.hmac
/usr/libexec/ipsec/._updown.klips.hmac
/usr/libexec/ipsec/._updown.netkey.hmac
/usr/libexec/ipsec/.addconn.hmac
/usr/libexec/ipsec/.auto.hmac
/usr/libexec/ipsec/.barf.hmac
/usr/libexec/ipsec/.cavp.hmac
/usr/libexec/ipsec/.eroute.hmac
/usr/libexec/ipsec/.ikeping.hmac
/usr/libexec/ipsec/.klipsdebug.hmac
/usr/libexec/ipsec/.look.hmac
/usr/libexec/ipsec/.newhostkey.hmac
/usr/libexec/ipsec/.pf_key.hmac
/usr/libexec/ipsec/.pluto.hmac
/usr/libexec/ipsec/.readwriteconf.hmac
/usr/libexec/ipsec/.rsasigkey.hmac
/usr/libexec/ipsec/.secrets.hmac
/usr/libexec/ipsec/.setup.hmac
/usr/libexec/ipsec/.showhostkey.hmac
/usr/libexec/ipsec/.spi.hmac
/usr/libexec/ipsec/.spigrp.hmac
/usr/libexec/ipsec/.tncfg.hmac
/usr/libexec/ipsec/.verify.hmac
/usr/libexec/ipsec/.whack.hmac
/usr/libexec/ipsec/_import_crl
/usr/libexec/ipsec/_keycensor
/usr/libexec/ipsec/_pluto_adns
/usr/libexec/ipsec/_plutorun
/usr/libexec/ipsec/_secretcensor
/usr/libexec/ipsec/_stackmanager
/usr/libexec/ipsec/_updown
/usr/libexec/ipsec/_updown.klips
/usr/libexec/ipsec/_updown.netkey
/usr/libexec/ipsec/addconn
/usr/libexec/ipsec/auto
/usr/libexec/ipsec/barf
/usr/libexec/ipsec/cavp
/usr/libexec/ipsec/eroute
/usr/libexec/ipsec/ikeping
/usr/libexec/ipsec/klipsdebug
/usr/libexec/ipsec/look
/usr/libexec/ipsec/newhostkey
/usr/libexec/ipsec/pf_key
/usr/libexec/ipsec/pluto
/usr/libexec/ipsec/readwriteconf
/usr/libexec/ipsec/rsasigkey
/usr/libexec/ipsec/secrets
/usr/libexec/ipsec/setup
/usr/libexec/ipsec/showhostkey
/usr/libexec/ipsec/spi
/usr/libexec/ipsec/spigrp
/usr/libexec/ipsec/tncfg
/usr/libexec/ipsec/verify
/usr/libexec/ipsec/whack
/usr/sbin/.ipsec.hmac
/usr/sbin/ipsec
/usr/share/doc/libreswan-3.15/CHANGES
/usr/share/doc/libreswan-3.15/CHANGES.freeswan.pluto
/usr/share/doc/libreswan-3.15/CHANGES.openswan
/usr/share/doc/libreswan-3.15/COPYING
/usr/share/doc/libreswan-3.15/CREDITS
/usr/share/doc/libreswan-3.15/CREDITS.freeswan
/usr/share/doc/libreswan-3.15/CREDITS.openswan
/usr/share/doc/libreswan-3.15/LICENSE
/usr/share/doc/libreswan-3.15/PlutoFlow.png
/usr/share/doc/libreswan-3.15/PlutoFlow.svg
/usr/share/doc/libreswan-3.15/ProgrammingConventions.txt
/usr/share/doc/libreswan-3.15/README
/usr/share/doc/libreswan-3.15/README.IANA-PEN
/usr/share/doc/libreswan-3.15/README.KLIPS
/usr/share/doc/libreswan-3.15/README.OCF
/usr/share/doc/libreswan-3.15/README.XAUTH
/usr/share/doc/libreswan-3.15/README.labeledipsec
/usr/share/doc/libreswan-3.15/README.nss
/usr/share/doc/libreswan-3.15/README.rfcs
/usr/share/doc/libreswan-3.15/README.x509
/usr/share/doc/libreswan-3.15/ipsec.html
/usr/share/doc/libreswan-3.15/ipsecsaref.png
/usr/share/doc/libreswan-3.15/l2tp-overhead.txt
/usr/share/doc/libreswan-3.15/libreswan-sysctl.conf
/usr/share/doc/libreswan-3.15/nss-howto.txt
/usr/share/doc/libreswan-3.15/pluto-internals.txt
/usr/share/doc/libreswan-3.15/win2k-notes.txt
/usr/share/doc/libreswan-3.15/windows-cross-compile.txt
/usr/share/doc/libreswan-3.15/examples/hub-spoke.conf
/usr/share/doc/libreswan-3.15/examples/ipv6.conf
/usr/share/doc/libreswan-3.15/examples/l2tp-cert.conf
/usr/share/doc/libreswan-3.15/examples/l2tp-psk.conf
/usr/share/doc/libreswan-3.15/examples/linux-linux.conf
/usr/share/doc/libreswan-3.15/examples/mast-l2tp-psk.conf
/usr/share/doc/libreswan-3.15/examples/oe-authnull.conf
/usr/share/doc/libreswan-3.15/examples/oe-exclude-dns.conf
/usr/share/doc/libreswan-3.15/examples/oe-upgrade-authnull.conf
/usr/share/doc/libreswan-3.15/examples/sysctl.conf
/usr/share/doc/libreswan-3.15/examples/xauth.conf
/usr/share/doc/libreswan-3.15/opportunistic-v1.historic/opportunism-spec.txt
/usr/share/doc/libreswan-3.15/opportunistic-v1.historic/opportunism.nr
/usr/share/man/man5/ipsec.conf.5.gz
/usr/share/man/man5/ipsec.secrets.5.gz
/usr/share/man/man5/ipsec_eroute.5.gz
/usr/share/man/man5/ipsec_klipsdebug.5.gz
/usr/share/man/man5/ipsec_pf_key.5.gz
/usr/share/man/man5/ipsec_spi.5.gz
/usr/share/man/man5/ipsec_spigrp.5.gz
/usr/share/man/man5/ipsec_tncfg.5.gz
/usr/share/man/man5/ipsec_trap_count.5.gz
/usr/share/man/man5/ipsec_trap_sendcount.5.gz
/usr/share/man/man5/ipsec_version.5.gz
/usr/share/man/man8/ipsec.8.gz
/usr/share/man/man8/ipsec__import_crl.8.gz
/usr/share/man/man8/ipsec__keycensor.8.gz
/usr/share/man/man8/ipsec__plutorun.8.gz
/usr/share/man/man8/ipsec__secretcensor.8.gz
/usr/share/man/man8/ipsec__stackmanager.8.gz
/usr/share/man/man8/ipsec__updown.8.gz
/usr/share/man/man8/ipsec__updown.klips.8.gz
/usr/share/man/man8/ipsec__updown.netkey.8.gz
/usr/share/man/man8/ipsec_addconn.8.gz
/usr/share/man/man8/ipsec_auto.8.gz
/usr/share/man/man8/ipsec_barf.8.gz
/usr/share/man/man8/ipsec_eroute.8.gz
/usr/share/man/man8/ipsec_ikeping.8.gz
/usr/share/man/man8/ipsec_klipsdebug.8.gz
/usr/share/man/man8/ipsec_look.8.gz
/usr/share/man/man8/ipsec_newhostkey.8.gz
/usr/share/man/man8/ipsec_pf_key.8.gz
/usr/share/man/man8/ipsec_pluto.8.gz
/usr/share/man/man8/ipsec_readwriteconf.8.gz
/usr/share/man/man8/ipsec_rsasigkey.8.gz
/usr/share/man/man8/ipsec_secrets.8.gz
/usr/share/man/man8/ipsec_setup.8.gz
/usr/share/man/man8/ipsec_showhostkey.8.gz
/usr/share/man/man8/ipsec_spi.8.gz
/usr/share/man/man8/ipsec_spigrp.8.gz
/usr/share/man/man8/ipsec_tncfg.8.gz
/usr/share/man/man8/ipsec_verify.8.gz
/usr/share/man/man8/ipsec_whack.8.gz
/usr/share/man/man8/pluto.8.gz
/var/log/pluto/peer/
/var/run/pluto/

Changelog

2017-09-19 - Paul Wouters <pwouters@redhat.com> - 3.15-7.5
- Resolves: rhbz#1493917 (new-ksk-libreswan-el6) Add DNSSEC trust anchor KSK 2017
2017-01-15 - Paul Wouters <pwouters@redhat.com> - 3.15-7.3
- Resolves: rhbz#1403201 pluto uses up available memory and fails with 'unable to popen'
- Resolves: rhbz#1311360 When IKE rekeys [...] (updated for IKEv1 responder side)
2016-11-21 - Paul Wouters <pwouters@redhat.com> - 3.15-7.2
- Resolves: rhbz#1313843 Prescript warning: Missing control file /var/run/pluto/pluto.ctl
- Resolves: rhbz#1375741 Pluto (libreswan) intermittent abort [extended patch]
- Resolves: rhbz#1369990 Libreswan connection sometimes does not get re-established after one side restarts
2016-11-03 - Paul Wouters <pwouters@redhat.com> - 3.15-7.1
- Resolves: rhbz#1375741 Pluto (libreswan) intermittent abort when ' auto --up --asynchronous' is used
- Resolves: rhbz#1335896 ipsec initnss/checknss custom directory not recognized
2016-08-24 - Paul Wouters <pwouters@redhat.com> - 3.15-7
- Resolves: rhbz#1313843 Prescript warning: Missing control file /var/run/pluto/pluto.ctl
2016-08-24 - Paul Wouters <pwouters@redhat.com> - 3.15-6
- Resolves: rhbz#1345959 openswan - libreswan migration issues
- Resolves: rhbz#1360134 libreswan needs to check additional CRLs after LDAP CRL distributionpoint fails
- Resolves: rhbz#1313709 ipsec pluto returns zero even if it fails [doc change only]
- Resolves: rhbz#1315415 ipsec.conf manpage does not contain any mention about crl-strict option
2016-03-07 - Paul Wouters <pwouters@redhat.com> - 3.15-5.3
- Resolves: rhbz#1311360 When IKE rekeys, if on a different tunnel [...]
2016-01-23 - Paul Wouters <pwouters@redhat.com> - 3.15-5.2
- Resolves: rhbz#1289498 keyingtries=0 is broken
- Resolves: rhbz#1166151 Pluto crashes on during 'service ipsec stop'
- Resolves: rhbz#1216946 IPv6 in RHEL6 fails after reboot
- Resolves: rhbz#1144462 ikev2 status shows "no tunnels up" while tunnel is up
2015-12-02 - Paul Wouters <pwouters@redhat.com> - 3.15-5.1
- Resolves: rhbz#1284966 add libreswan to RHEL6 (core)
- Resolves: rhbz#1288086 /var/run/pluto should have 755 and should have 700

See Also

Package Description
librsvg2-2.26.0-14.el6.i686.rpm An SVG library based on cairo
librsvg2-2.26.0-14.el6.x86_64.rpm An SVG library based on cairo
librsvg2-devel-2.26.0-14.el6.i686.rpm Libraries and include files for developing with librsvg
librsvg2-devel-2.26.0-14.el6.x86_64.rpm Libraries and include files for developing with librsvg
libsamplerate-0.1.7-2.1.el6.i686.rpm Sample rate conversion library for audio data
libsamplerate-0.1.7-2.1.el6.x86_64.rpm Sample rate conversion library for audio data
libsamplerate-devel-0.1.7-2.1.el6.i686.rpm Development related files for libsamplerate
libsamplerate-devel-0.1.7-2.1.el6.x86_64.rpm Development related files for libsamplerate
libsane-hpaio-3.14.6-4.el6.1.x86_64.rpm SANE driver for scanners in HP's multi-function devices
libselinux-2.0.94-7.el6.i686.rpm SELinux library and simple utilities
libselinux-2.0.94-7.el6.x86_64.rpm SELinux library and simple utilities
libselinux-devel-2.0.94-7.el6.i686.rpm Header files and libraries used to build SELinux
libselinux-devel-2.0.94-7.el6.x86_64.rpm Header files and libraries used to build SELinux
libselinux-python-2.0.94-7.el6.x86_64.rpm SELinux python bindings for libselinux
libselinux-ruby-2.0.94-7.el6.x86_64.rpm SELinux ruby bindings for libselinux
Advertisement
Advertisement